| Step | | Procedure & Parts & Tools |
| 1 |
|
LAY THE MACHINE DOWN SO THE FRONT COVER IS FACING UP. REST THE MACHINE ON BOARDS SO THAT THE FILTER ON THE BACK DOESNT GET BROKEN.
|
| 2 |
|
REMOVE THE 4 SCREWS AND LIFT UP ON THE FRONT COVER TO REMOVE IT.
| Screwdriver-phillips |
|
|
| 3 |
|
LOCATE THE COMPRESSOR AT THE BOTTOM OF THE MACHINE.
|
| 4 |
|
HOLD THE 3 SCREWS IN PLACE WITH YOUR HAND AND TURN THE NUT DRIVER TO REMOVE THE SCREWS.
| Nut driver-metric 7mm |
|
|
| 5 |
|
SET THE COMPRESSOR ASIDE FOR EASIER ACCESS TO THE SOLENOID VALVE HOSE. DO NOT DISCONNECT THE HOSE OR ANY WIRING.
|
| 6 |
|
PULL THE BOTTOM HOSE OFF OF THE SOLENOID VALVE.
|
| 7 |
|
PLUG THE MACHINE IN AND TURN IT ON. IF SOLUTION COMES OUT THE BOTTOM OF THE SOLENOID VALVE, THE SOLENOID VALVE IS OKAY. TURN THE MACHINE OFF.
|
| 8 |
|
IF SOLENOID VALVE IS OKAY, REVERSE STEPS 1 THRU 6 TO REASSEMBLE THE MACHINE.
|